Application Instructions

Slab to slab

Application Instructions:

1. Apply Krystol Waterstop Treatment™ to the intended joint area with a circular, scrubbing motion for maximum adhesion and penetrations.
2. Attach the keyway form to the edge of the concrete form or wet-set into the plastic concrete for shotcrete applications.
3. Remove form from set concrete. Ensure that the keyway is clean that no wood is left in the keyway. Remove any form release agents, dirt or debris.
4. Tightly pack the Krystol Waterstop Grout™ mix into the keyway. Protect the application from damage by rain, rapid drying or freezing.
   

Note: Wait a minimum of 28 days after the concrete has been poured before packing the Krystol Waterstop Grout. Surfaces to be treated must be pre-wet to a saturated-surface-dry (SSD) condition. Do not leave any standing water.

For more detailed application instructions, please read Technical Bulletin 104.

Application Details:
-- Select an Application Detail -- Crack Repair - Negative side Crack Repair - Positive side ---------------------------------- Joint Repair - Wall to wall (vertical) Joint Repair - Slab to slab Joint Repair - Wall to slab Joint Repair - Slab to wall ---------------------------------- New Cast-in-Place Joint - Wall to wall (vertical) New Cast-in-Place Joint - Slab to slab New Cast-in-Place Joint - Wall to slab New Cast-in-Place Joint - Slab to wall ---------------------------------- New Shotcrete Joint - Wall to wall (vertical) New Shotcrete Joint - Wall to wall (horizontal) - Grout only New Shotcrete Joint - Wall to wall (horizontal) - Treatment only New Shotcrete Joint - Slab to slab New Shotcrete Joint - Wall to slab (wall sits on slab) New Shotcrete Joint - Slab to wall (slab is inboard of the wall) ---------------------------------- Surface Treatment - Positive side Surface Treatment - Negative side

Back to Top

	MATERIALS Krystol Waterstop Grout™ Krystol Waterstop Treatment™ Clean water supply TOOLS Mixing bucket, drill and paddle Natural bristle concrete brush Margin trowel Watering can and towel

Download our CAD details in the following formats:

DWG

DXF

image

PDF