Other Krystol™ Waterproofing Projects

Krystol Crack Repair System
Partial Project List

EXISTING SLABS ON GRADE
Project:
Point Roberts Border Crossing
Location:
Point Roberts, WA, USA
Date:
1997
Product:
Krystol T1 and T2
Owner:
United States Government Services Administration
Performance:
In the Port of Entry facility at the border, hydrostatic pressure affected the adhesion of the floor tiles which had to be removed to allow a slurry application of Krystol T1 and T2. The floors are now dusty dry.

WATER CONTAINMENT
Project:
Annacis Island Wastewater Plant
Location:
Annacis Island, Vancouver, Canada
Date:
1996
Product:
Krystol T1 and T2
Owner:
Greater Vancouver Regional District
Applicator:
PremForm
Engineers:
ABR, Consortium of:
Associated Engineering,Brown & Caldwell Consultants Canada Ltd.,
Reid Crowther Partners Ltd.
Repairs: G.C. Walter & SCI Construction Ltd.
Performance:
Products were applied to the inside surface of the tanks, the cracks self-healed and did not leak.

HYDRO ELECTRIC DAM
Project:
Revelstoke Hydro Electric Dam
Location:
Revelstoke, B.C., Canada
Date:
1985
Product:
Krystol T1 and T2
Owner:
BC Hydro
Applicator:
Dalcan Constructors
Engineer:
BC Hydro, UMA Engineers
Performance:
The exterior face of the powerhouse wall below the dam was treated with the brush on application of Krystol T1 and T2. A review conducted in 1992 confirmed that the Krystol System is performing well and all areas are dry.

BELOW GRADE PITS
Project:
Ocean Construction Pipe Plant Pit
Location:
Vancouver, Canada
Date:
1975
Products:
Krystol T1 and T2
Owner:
Ocean Construction Supplies Ltd.
Applicator:
General Contractor: Canusa Construction Ltd.
Sub-contractor: Canwest Waterproofing Ltd., Canusa Construction Ltd.
Performance:
17-feet below the water table, hydrostatic pressure forced water to seep through the concrete. The walls of the equipment room were coated with Krystol T1 and T2. No further leakage has occurred, 20 years later the room remains dusty dry.

CRACK REPAIR
Project:
Tower Place Office Building
Location:
London, England
Date:
2001
Product:
Krystol T1 and T2
Owner:
Tisman & Spears
Engineer:
Arup Engineering
Distributor:
ICCT Ltd.
Performance:
Krystol T1 and T2 were installed from the inside of the tunnel to eliminate water entry. To date the leaks have been stopped.

JOINT DESIGN SYSTEM
Project:
Toronto International Airport
Location:
Toronto, ON, Canada
Date:
1978
Product:
Krystol T1 and T2
Owner:
Canadian Department of Transport
Performance:
Kryton's Krystol Crack Repair System (T1/T2) was applied against significant hydrostatic pressure to stop inside running water from penetrating through the cold joints of utility tunnels.

Back to Top